Summer Special Limited Time 60% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 8w52ceb345

On the network shown in the figure, IS-IS runs on R1, R2, R4, and R5,...

On the network shown in the figure, IS-IS runs on R1, R2, R4, and R5, and the area ID is 49.0001. IS-IS runs on R3 and R6, and the area ID is 49.0002. The import-route isis level-2 into level-1 command is configured on R2.

In AS 65000, R1, R3, R4, and R6 each establish iBGP peer relationships with R2 and R5. R2 and R5 are Route Reflectors (RRs), and R1, R4, R3, and R6 are clients.

An iBGP peer relationship is established between R2 and R5, and the same cluster ID is configured. The iBGP peer relationships are established using Loopback0. The IP address of Loopback0 on each router is 10.0.X.X/32, where X is the router number.

R1 and R4 import the external route 192.168.1.0/24 to BGP through the import-route command, and R3 and R6 import the external route 192.168.2.0/24 to BGP through the import-route command.

Which of the following statements are true?

A.

The BGP routing table of R3 contains one valid route to 192.168.2.0/24.

B.

The BGP routing table of R5 contains two valid routes to 192.168.1.0/24.

C.

The BGP routing table of R2 contains three valid routes to 192.168.1.0/24.

D.

The BGP routing table of R4 contains three valid routes to 192.168.2.0/24.

H12-831_V1.0 PDF/Engine
  • Printable Format
  • Value of Money
  • 100% Pass Assurance
  • Verified Answers
  • Researched by Industry Experts
  • Based on Real Exams Scenarios
  • 100% Real Questions
buy now H12-831_V1.0 pdf
Get 60% Discount on All Products, Use Coupon: "8w52ceb345"