Huawei's CloudCampus architecture enables cloud-managed APs to register with iMaster NCE-Campus for centralized configuration, monitoring, and network management.
Successful AP onboarding requires the device to operate in the correct management mode, possess appropriate registration information, and maintain IP connectivity to the management platform.
Option A is correct. An AP not operating in cloud mode cannot complete the required cloud-management onboarding process. The device must first be switched to the appropriate operating mode.
Option B is correct. Incorrect device registration information can cause onboarding failure. Huawei identifies problems involving missing device ESNs, incorrect site assignments, and unauthorized device information as possible registration failure causes.
Option C is correct. The AP must communicate with the cloud management platform. Routing failures, disconnected interfaces, DNS problems, or inaccessible controller ports may prevent registration.
Option D is incorrect. Configuring a CAPWAP source IP address is associated with traditional WAC-based CAPWAP operation, not the cloud AP registration requirement described in this question.
Huawei recommends using display cloud-mng info to inspect management configuration and display cloud-mng online-fail-record in diagnostic view to identify onboarding failure reasons.
Therefore, the correct selections are A, B, and C.
Training Material reference: WLAN Troubleshooting → Cloud Management Faults → Flowchart and Procedure for Troubleshooting Onboarding Failures of Cloud WACs and APs, PDF pp. 972–975.
Lab Guide reference: Lab 4 — Cloud Management Networking → Device Registration and Verification.
────────────────────────────────────────────────────────