A new drive was recently added to a Linux system.

To create an appropriate device label, format and create an ext4 file system on the new partition, you can use the following commands:

To create a GPT (GUID Partition Table) label on the new drive /dev/sdc, you can use the parted command with the -s option (for script mode), the device name (/dev/sdc), the mklabel command, and the label type (gpt). The command is:

parted -s /dev/sdc mklabel gpt

To create a primary partition of 10 GB on the new drive /dev/sdc, you can use the parted command with the -s option, the device name (/dev/sdc), the mkpart command, the partition type (primary), the file system type (ext4), and the start and end points of the partition (1 and 10G). The command is:

parted -s /dev/sdc mkpart primary ext4 1 10G

To format and create an ext4 file system on the new partition /dev/sdc1, you can use the mkfs command with the file system type (ext4) and the device name (/dev/sdc1). The command is:

mkfs.ext4 /dev/sdc1

You can verify that the new partition and file system have been created by using the lsblk command, which will list all block devices and their properties.