In a home with a Class 2 intrusion, where the floor is 1,300 square feet...

The IICRC WRT body of knowledge teaches that initial dehumidification capacity for LGR dehumidifiers is based oncubic footage and class of water intrusion. Class 2 intrusions involve a larger amount of moisture absorption than Class 1 but do not reach the full saturation of Class 3.

First, calculate the affected volume:

1,300 sq ft × 8 ft =10,400 cubic feet.

ForClass 2 losses, a commonly accepted WRT guideline is approximatelyone LGR dehumidifier (≈200–210 PPD)per10,000–12,000 cubic feet. This capacity balances evaporation demand without over-drying or inefficiency.

A recommendation of 208 PPD aligns directly with this guidance and reflects standard WRT training tables used for initial equipment placement. Lower values (26 or 99 PPD) are insufficient for the moisture load, while 303 PPD exceeds the initial requirement for a Class 2 loss and would require justification through monitoring data.

The WRT manual emphasizes that this is aninitial recommendationand must be validated by daily psychrometric and material moisture monitoring. Equipment may be adjusted as drying progresses.