You use the FortiManager SD-WAN overlay orchestrator to prepare an SD-WAN deployment.

The SD-WAN 7.6 Enterprise Administrator Study Guide states: “For branches and hubs, it creates BGP, IPsec, and CLI templates to accommodate all required configuration changes.”

Accordingly, the overlay orchestrator generates the following templates for each spoke:

The IPsec tunnel template configures the spoke as an IPsec dial-up client and applies the tunnel parameters appropriate to the selected topology, authentication method, routing design, and ADVPN settings.

The BGP template configures the spoke’s BGP routing, including the autonomous system, neighbor relationships, and either BGP-per-overlay or BGP-on-loopback behavior selected in the wizard.

The CLI template supplies additional configuration that cannot be represented entirely by the dedicated IPsec and BGP templates.

The guide separately explains that, for branch devices, FortiManager adds the required members and zones to the defined SD-WAN template. It does not generate a separate rules template for the spoke. Static routes are also not delivered through a dedicated static-route template; routing for the overlay is configured using the generated BGP template. Therefore, options A and E are incorrect.