A network administrator is deploying a new switch and wants to make sure that the...

Understanding Spanning Tree Protocol (STP):

STP is used to prevent network loops in Ethernet networks by creating a spanning tree that selectively blocks some redundant paths.

Default Priority Value:

Bridge Priority: STP uses bridge priority to determine which switch becomes the root bridge. The default bridge priority value for most switches is 32768.

Priority Range: The bridge priority can be set in increments of 4096, ranging from 0 to 61440.

Configuration and Verification:

When deploying a new switch, the network administrator can verify the bridge priority using commands such as show spanning-tree to ensure it is set to the default value of 32768.

Comparison with Other Values:

4096 and 8192: Lower than the default priority, indicating these would be manually configured for higher preference.

36684: A non-standard value, likely a result of specific configuration changes.