You are troubleshooting a BGP connection.

Step 1: Check the error messages in the log.

The log messages indicate:

vbnet

Copy code

Dec 22 19:22:29 router rpd[7394]: bgp_process_open:4185: NOTIFICATION sent to 192.168.1.4 (Internal AS 65000): code 2 (Open Message Error) subcode 2 (bad peer AS number), Reason: peer 192.168.1.4 (Internal AS 65000) claims 65100, 65000 configured

Dec 22 19:22:33 router rpd[7394]: bgp_pp_recv:4788: NOTIFICATION sent to 192.168.1.4+56714 (proto): code 2 (Open Message Error) subcode 2 (bad peer AS number), Reason: no group for 192.168.1.4+56714 (proto) from AS 65100 found (peer as mismatch) in master

Step 2: Interpret the messages.

The first message indicates that a BGP NOTIFICATION was sent to 192.168.1.4 due to an "Open Message Error" with a "bad peer AS number" because peer 192.168.1.4 claims AS 65100, but 65000 is configured.

The second message reiterates that the peer AS number 65100 does not match the configured AS 65000, causing a mismatch.

Step 3: Understand the MD5 key error.

sql

Copy code

Dec 22 19:23:29 router kernel: tcp_auth_ok: Packet from 192.168.1.5:64047 missing MD5 digest

Dec 22 19:23:30 router kernel: tcp_auth_ok: Packet from 192.168.1.6:56201 missing MD5 digest

These lines indicate that packets from 192.168.1.5 and 192.168.1.6 are missing the MD5 digest, suggesting a potential MD5 key misconfiguration.

Step 4: Validate the answers.

Option B: The 192.168.1.5 peer has a misconfigured MD5 key. This is correct because the logs show that packets from 192.168.1.5 are missing the MD5 digest.

Option D: The 192.168.1.4 peer has a misconfigured autonomous system number. This is correct because the logs indicate that 192.168.1.4 claims AS 65100, while the router is configured for AS 65000.

References:

Document on useful Juniper commands for troubleshooting BGP and understanding log messages​​​​.

Commands for checking BGP logs: show log messages | match notification, show bgp summary, show configuration protocols bgp​​​​.