Halloween Sales Special - 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: coponace

On the network shown in the following figure, the management VLAN is VLAN 10, and...

Huawei H12-821_V1.0 Full Course Access
Huawei H12-821_V1.0 View All Questions

On the network shown in the following figure, the management VLAN is VLAN 10, and the AP is configured to obtain an IP address on the network segment 10.1.1.0/24 through DHCP. The AP, AC, and AR function as the DHCP client, DHCP relay agent, and DHCP server, respectively. Which of the following configurations for the DHCP relay agent and DHCP server are correct?

A.

[AC] dhcp server group AP[AC-dhcp-server-group-AP] dhcp-server 172.21.1.2[AC-dhcp-server-group-AP] quit[AC] interface Vlanif 10[AC-Vlanif 10] dhcp select relay[AC-Vlanif 10] dhcp relay server-select AP[AC-Vlanif 10] quit

B.

[AR] ip pool AP[AR-ip-pool-AP] network 10.1.1.0 mask 24[AR-ip-pool-AP] gateway-list 10.1.1.2[AR-ip-pool-AP] excluded-ip-address 10.1.1.1[AR-ip-pool-AP] quit[AR] interface GigabitEthernet 0/0/1[AR-GigabitEthernetO/O/1] dhcp select global[AR-GigabitEthernet0/0/l] quit[AR] ip route-static 10.1.1.0 255.255.255.0 172.21.1.1

C.

[AR] ip pool AP[AR-ip-pool-AP] network 172.21.1.0 mask 24[AR-ip-pool-AP] gateway-list 172.21.1.2[AR-ip-pool-AP] excluded-ip-address 172.21.1.1[AR-ip-pool-AP] quit[AR] interface GigabitEthernet 0/0/1[AR-GigabitEthernetO/0/1] dhcp select global[AR-GigabitEthernetO/0/1] quit[AR] ip route-static 10.1.1.0 255.255.255.0 172.21.1.1

D.

[AC] dhcp server group AP[AC-dhcp-server-group-AP] dhcp-server 10.1.1.2[AC-dhcp-server-group-AP] quit[AC] interface Vlanif 10[AC-Vlanif 10] dhcp select relay[AC-Vlanif 10] dhcp relay server-select AP[AC-VlaniflO] quit

H12-821_V1.0 PDF/Engine
  • Printable Format
  • Value of Money
  • 100% Pass Assurance
  • Verified Answers
  • Researched by Industry Experts
  • Based on Real Exams Scenarios
  • 100% Real Questions
buy now H12-821_V1.0 pdf
Get 70% Discount on All Products, Use Coupon: "coponace"
Next
See the network shown in the following figure.
A filter named si is configured on a device using the as-path-filter command and is...
Previous