IEEE 802.11ac, commonly known as Wi-Fi 5, introduced major improvements in wireless transmission capacity through wider operating channels, higher-order modulation, and enhanced MIMO capabilities.
The standard supports operating channel bandwidths of 20 MHz, 40 MHz, 80 MHz, and 160 MHz.
A 160 MHz channel can be constructed by bonding eight contiguous, non-overlapping 20 MHz channels. This increases the available transmission bandwidth and supports higher physical-layer data rates.
IEEE 802.11ac also introduced 256-QAM modulation, enabling each modulated symbol to represent eight information bits under suitable radio conditions.
Combined with multiple spatial streams, these improvements allow theoretical transmission rates exceeding 1 Gbps.
IEEE 802.11a supports a maximum theoretical rate of 54 Mbps and does not implement the channel-bonding capabilities described.
IEEE 802.11n introduced significant MIMO and channel-bonding improvements but supports channel widths up to 40 MHz rather than 160 MHz.
IEEE 802.11ax supports 160 MHz operation and higher spectral efficiency, but it was introduced after IEEE 802.11ac.
Therefore, IEEE 802.11ac was the first listed standard supporting the required 160 MHz channel-bonding capability and gigabit-class wireless transmission rates.
Technical qualification: A 160 MHz channel alone does not guarantee a rate exceeding 1 Gbps; the number of spatial streams and selected modulation and coding scheme also determine the achievable PHY rate.
Training Material reference: WLAN Radio Resource Management → Dynamic Bandwidth Selection, PDF p. 305; WLAN Planning Basics → Theoretical WLAN Rate Calculation, pp. 364–365; Channel Bonding, p. 372.
────────────────────────────────────────────────────────