Question
Correct Selection
What happens if you send a message to 172.10.47.255?
The message is sent to all computers on the network.
Is 172.10.47.254 on the same network?
Yes
What is the IP address of the physical network adapter?
172.10.47.147
The Linux ip add show command displays network interface information, including assigned IPv4 and IPv6 addresses, subnet prefixes, broadcast addresses, and interface status.
1. Sending a message to 172.10.47.255 — Broadcast communication
The output contains brd 172.10.47.255, identifying this address as the directed broadcast address for the local subnet. Packets sent to this address target all IPv4 hosts within the 172.10.47.0/24 broadcast domain. Individual hosts may filter or ignore broadcast traffic.
2. Is 172.10.47.254 on the same network? — Yes
The physical interface has IPv4 address 172.10.47.147/24. The /24 prefix corresponds to subnet mask 255.255.255.0, meaning the first 24 bits identify the network.
The usable host range extends from 172.10.47.1 through 172.10.47.254. Therefore, 172.10.47.254 belongs to the same subnet and can be reached directly at the IP layer without routing through a default gateway, assuming normal local connectivity.
3. Physical network adapter IP address — 172.10.47.147
The output identifies eth0 as the physical Ethernet interface and shows inet 172.10.47.147/24. In contrast, lo represents the virtual loopback interface with address 127.0.0.1.
The UP and LOWER_UP flags indicate that the Ethernet interface is enabled and its physical link is operational.
[References:, Cisco CCST IT Support (100-140) Official Exam Topics — Domain 3.3: Examine Basic End-Device Connectivity to the Network. , Cisco Learning Network, Cisco CCST Networking (100-150) Official Exam Topics — Domain 2.2: IPv4 Addresses and Subnet Formats. , Cisco Learning Network, Cisco Technical Documentation — Understand Host and Subnet Quantities. , Cisco, Linux iproute2 Documentation — ip-address(8), Displaying Network Interface Addresses., , ]